Hisense 12К Manual De Instrucciones página 28

(1)
Prepare a polyvinyl chloride pipe with a 21mm inside diameter(12K,18K).
Prepare a polyvinyl chloride pipe with a 32mm outer diameter(24K,36K,42K,48K,60K).
(2) Fasten the tubing to drain hose with the adhesive agent and factory-supplied clamp . The
drain piping must be performed with a down-slope pitch of 1/25 to 1/100.
*The total length of a+b+c :
For 12K,18K: a≤300，
For 24K,36K,42K,48K,60K: a≤300，b≤850，c≤50,a+b+c≤1100
*In case of lifting the drain pipe at outlet part, perform the drain piping work as shown in the
above figure.
(3) Insulate the drain pipe after connecting the drain hose.
b≤500，c≤50
Installation and Maintenance
23