Output Power - Shure SLX Manual De Instrucciones

SLX
Working Range
Line of Sight
Audio Frequency Response
Total Harmonic Distortion
Ref. ±38 kHz deviation with 1 kHz
tone
Dynamic Range
Operating Temperature Range
Transmitter Audio Polarity
SLX1
Audio Input Level
Gain Adjustment Range
Input Impedance
RF Output Power
Pin Assignments
TA4M
Dimensions
Weight
Housing
Power Requirements
Battery Life
SLX2
Maximum Input Level
Gain Adjustment Range
RF Output Power
Dimensions
Weight
Housing
Power Requirements
Battery Life
10
100 m (300 ft)
Note: Actual range depends on RF signal absorption,
reflection and interference.
45–15000 Hz
Note: Dependent on microphone type
<0.5%, typical
>100 dB, A-weighted
-18°C (0°F) to +50°C (122°F)
Note: Battery characteristics may limit this range.
Positive pressure on microphone diaphragm (or
positive voltage applied to tip of WA302 phone plug)
produces positive voltage on pin 2 (with respect to
pin 3 of low-impedance output) and the tip of the high
impedance 1/4-inch output.
gain position
mic: −10 dBV maximum
0dB: +10 dBV maximum
–10dB: +20 dBV maximum
30 dB
1 MΩ
10–30 mW
varies by region
1: ground (cable shield)
2: + 5 V Bias
3: audio
4:
Tied through active load
to ground (On instru-
ment adapter cable, pin
4 floats)
108mm x 64mm x 19mm (H x W x D)
81 g (3 oz.), without batteries
galvanized steel
2 "AA" size alkaline or rechargeable batteries
up to 8 hours (alkaline)
at –10 dB gain
+2 dBV
setting:
at 0 dB gain setting: –8 dBV
10 dB
10–30 mW
varies by region
254mm X 51mm dia. (10 X 2in.)
290 g (10.2oz.) (without batteries)
Molded PC/ABS handle and battery cup
2 "AA" size alkaline or rechargeable batteries
up to 8 hours (alkaline)
SLX4
Dimensions
Weight
Housing
Sensitivity
Power Requirements
Configuration
Maximum Audio Output Level
Ref. ±38 kHz deviation with 1 kHz
tone
Impedance
Pin Assignments
Image Rejection
Volume Adjustment Range
Frequency Range and Transmitter
Output Level
Band Range
G4 470 to 494 MHz
G4E 470 to 494 MHz
G5 494 to 518 MHz
G5E 494 to 518 MHz
G8 494.200 to 509.825 MHz
H5 518 to 542 MHz
J3 572 to 596 MHz
L4 638 to 662 MHz
L4E 638 to 662 MHz
P4 702 to 726 MHz
R13 794 to 806 MHz
R5 800 to 820 MHz
X4 925 to 932 MHz
S6 838 to 865 MHz
S10 823 to 832 MHz
JB 806 to 810 MHz
R19 794 to 806 MHz
Q4 740 to 752 MHz
K3E 606 to 630 MHz
NOTE:
This Radio equipment is intended for use in musical professional entertainment
and similar applications.
This Radio apparatus may be capable of operating on some frequencies not
authorized in your region. Please contact your national authority to obtain infor-
mation on authorized frequencies and RF power levels for wireless microphone
products.
42mm X 197mm X 134mm (H x W x D) 816 g (1 lb 13oz.)
galvanized steel
-105 dBm for 12 dB SINAD, typical
12–18 V DC @ 150 mA, supplied by external
power supply (tip positive)
Impedance balanced
XLR connector: –13 dBV (into 600 Ω
load)
6.35 mm (1/4")
–2 dBV (into 3 kΩ load)
connector:
XLR connector:
200 Ω
6.35 mm (1/4")
1 kΩ
connector:
XLR connector: 1=ground, 2=audio,
3=no audio
6.35 mm (1/4")
Tip=audio, Ring=no au-
connector: dio, Sleeve=ground
>70 dB, typical
0 dB to -25 dB

Output Power

30 mW
30 mW
30 mW
30 mW
30 mW
30 mW
30 mW
30 mW
30 mW
30 mW
20 mW
20 mW
10 mW
10 mW
10 mW
10 mW
10 mW
10 mW
10 mW