Cleaning And Care - Klarstein 10031386 Manual De Instrucciones

Cooling/Heating operation mode
• Press the "MODE" button, select the Cooling or Heating operation mode.
• By pressing the the ARROWS, you can set the temperature range from 16°C (60°F) to 32°C (90°F), the dis-
play changes as you touch the button.
• By pressing the "SPEED" button, you can select the fan speed from LOW, MID, HIGH, AUTO.
• Press the "ON/OFF" button, the air-conditioner starts to operate.
• Press the "ON/OFF" button again, the air-conditioner stops.
• Note: The cold wind type has no heating function.
Fan operation mode
• Press the "MODE" button, select the fan operation mode.
• By pressing the "SPEED" button, you can select the fan speed from LOW, MID, HIGH.
• Press the "ON/OFF" button, the air-conditioner starts to operate.
• Press the "ON/OFF" button again, the air-conditioner stops.
• Note: In the fan operation mode, the temperature settings is non-effective.
Drying operation mode
• Press the "MODE" button, select the rying operation mode.
• By pressing the the ARROWS, you can set the temperature range from 16°C (60°F) to 32°C (90°F), the dis-
play changes as you touch the button.
• By pressing the "SPEED" button, you can select the fan speed from LOW, MID, HIGH, AUTO.
• Press the "ON/OFF" button, the air-conditioner starts to operate.
• Press the "ON/OFF" button again, the air-conditioner stops.
Backlight function (for remote controllers with such function only)
The remote controller has a backlight which can be turned on by pressing any button for the convenience of
operation in darkness. The backlight will be automatically turned off if there is no operation within 10 seconds.
Cleaning Air Filter
1. Turn off the air conditioner and cut off the power supply.
2. Pull out the filter cover and remove the filter from cover.
3. Wash air filter in warm soap water. Do not put air filter in the dish-
washer or use any chemical cleaners. And dry filter completely before
replacing.
4. Attach the air filter to the filter cover using the attachment hooks on
the inner surface of the cover. Put the filter cover back to its place.
27

Cleaning and Care