Cleaning Methods - GNATUS Bio Free 2L Manual De Propietario

EqUIPMENT'S OPERATION
control panel and operations
6. - Heater status
Press the TC button, it flashes
again, it turns off
7. Time Display LED digital display operation. It counts down, after the
work is started.
8. SET button (configuration) – Clock quick setup button. Press the SET button,
the LED displays
the button adds 5 minutes.
9. Button - Clock decrease button. Each time pressed, reduces the clock in 1
minute.
10. CT Button – Heater button. Press the TC button, when flashing
that the heater is on. To cancel the heat, press TC again,
the heater is off.
When the water temperature reaches 60°C, the system turns off automatically.

cleaning methods

Regular cleaning
Use tap water, chemical
solutions are unnecessary in
most cases.
14
indicating that the heater is on. Press the TC button
, indicating that the heater is off.
. Press the button again to set the clock. Each time it is pressed,
Only tap water is required.
Appropriate places: Optical stores, laboratories
chemical and dental clinics.
Cleaning methods:
1. Add water to the cleaning tank to a level between
the lines "MIN" and "MAX" and above the object.
2. Place the objects to be cleaned inside the basket
or directly into the cleaning tank.
3. Press the SET button to set the clock between 5
and 10 minutes. Press the On/Off button once to start
the cleaning.
Notes on the use of the basket:
1. The basket reduces friction between the objects
and the tank, but absorbs about 30% of ultrasonic
energy reducing the cleaning effect.
2. When objects are relatively large and with oily
residues, they can be placed directly into the tank.
, i, indicates
it turns off indicating that