Operation Of Equipment - GNATUS Bio Free 2L Manual De Propietario

EqUIPMENT'S OPERATION
control panel and operations
01
1. Indicator light – Working status
Green - Normal operating status, ready for use.
Red - Under the protection of overheating, it takes 15 minutes of waiting for the light
changes from red to green. The operation can be resumed later.
2. On/Off button – on/off switch on the unit
After turning on, the LED display, with standard time
and with normal operating status.
Press the On/Off button once to start the operation of the machine. Cleaning stops when
the countdown stops
press the On/Off button.
3. Function button - Functions (Degassing/Normal)
Press the Function Button (03)
been selected. Press the On/Off button to start the degassing function
about 90 seconds, then the unit will return to the normal cleaning function (05). Pressing
the On/Off button before the end will cause the degassing to be interrupted. If you need
additional degassing, press the Function Button again (03),
Degassing
The newly added water can generate many air bubbles on the walls of the tank. This
circumstance reduces the effect of cleaning in the early phase of the ultrasonic cleaning.
Turning on the degassing function dissipates the droplets and bubbles of air, improving the
efficiency of cleaning (approximate time, 90 seconds).
4. - Degassing status
- Illuminated, the degassing function is selected.
in progress.
5. - Normal cleaning status
- Illuminated, normal cleaning is in progress.
02 03 04 05
. If the device needs to be stopped before the time runs out,
, it lights up, indicating that the degassing function has
06 07 08 09
, and the unit will be ready
.
- Blinking, the degassing is
10
. It illuminates for
13