Water Level - Bestway 58259 Manual De Instrucciones

PRCD Test
RESET
RESET
TEST
TEST
1
NOTE: Drawings for illustration purpose only. May not reflect
actual product. Not to scale.
1. Insert the plug.
2. Press the "RESET" button, the indicator light turns green.
3. Press the "TEST" button, the indicator light turns off.
4. Press the "RESET" button, the indicator light turns green.
WARNING: The PRCD plug must be tested before each use to
avoid risk of electric shock.
WARNING: Before inserting plug into a power outlet, make sure
the current rate of the power outlet is suitable for the pump.
WARNING: Do not use the heater if this test fails and contact
our After Sales Service.
NOTE: To order spare parts for the Pool Heater, please provide us with part no. and part name. Drawings for
illustration purposes only. May not reflect actual product. Not to scale.
Above Ground Pool

Water Level

A
P6124
Hose
Clamp
Heating Reset
RESET
1. Be sure to press the "Reset" button on the
2. If the pool heater is not heating properly, press the "Reset"
If the water temperature has not changed 4-5 hours after activation of the heating system, use a thin object to press the
RESET BUTTON, and restart the heating system.
IMPORTANT: The heating system will not operate if the outside temperature is above 40°C (104°F) or if the Pool Heater is
under direct sunlight. Under these conditions, please wait until a cooler time of day before pressing the RESET BUTTON with
a thin object and restart the heating system.
RESET
TEST
2
3
B
P6005 O-Ring
P6176
Hose
pool heater using a small and thin object before
initial operation
button on the pool heater.
IMPORTANT INSTRUCTION FOR USING
RESET
TEST
4
POOL HEATER EQUIPOTENTIAL BONDING TERMINAL
It is recommended to arrange for a qualified electrician to connect the
Pool Heater to a equipotential bonding terminal using a (minimum)
2.5mm solid copper conductor.
2
Filter Pump
RESET BUTTON
6
Sand Filter
P6124
P6124
S-S-004678 S-S-004678