Section 1 - Quick Start Information; Getting Started - Fisher&Paykel ICON Manual De Uso Y Cuidado

SECTION 1 - QUICK START INFORMATION

1. GETTING STARTED

1
2
3
4
5
Place the device on a level surface, level with or below head height,
to prevent water entering the tubing and the device enclosure.
Plug the power cord into the power supply.
Remove the Chamber Lid and reach inside the Water Chamber with your
fingers to take hold of the circular chamber grip. Pull the Water Chamber up
and out of the device.
CAUTION: Do not fill the Water Chamber while it is in the device; the Water
Chamber should always be removed before filling.
Fill the Water Chamber with distilled water up to the maximum water line,
which is marked on the side of the Water Chamber.
CAUTION: Do not use the device without a Water Chamber.
To replace the Water Chamber, the arrow on the circular chamber grip should
face toward the Elbow.
Fit the Chamber Lid by lining up the large dot on the lid with the large
dot on the top of the device . When the two symbols are aligned, apply
downward force and turn clockwise to align the large dot with the small dot
on the top of the device.
NOTE: The Chamber Lid must be correctly fitted for optimal pressure delivery.
A - 2