Timed Dry; Push The Control Dial In To Start - Crosley CD-3 Guía De Uso Y Cuidado

Timed Dry

This cycle can be used to regulate the drying time. Use
with Air Fluff, Low, Medium (select models) or Regular
temperature settings. For timed drying, turn the control
dial until the pointer points to the proper time setting
in the Timed Dry cycle.
Note:
Using the Air Fluff temperature setting will
require a longer drying time.
Special Options
(select models)
Damp Dry is located on the Timed Dry section of the
dial. It is designed to partially dry items and can be
used with any temperature selection. Damp Dry will
provide 20 minutes of tumbling time, followed by
10 minutes of cool-down tumbling.
Touch Up will release wrinkles from items that are
clean and dry but only slightly wrinkled, such as from a
crowded closet or suitcase, or from sitting in the dryer
too long after the cycle has ended. Touch Up provides
10 minutes of tumbling followed by 10 minutes of cool-
down tumbling and can be used with any temperature
selection.
STEP 4
Push the Control Dial in
to Start
Push the control dial in to start the dryer. The dryer
door must be closed for the dryer to start.
Note:
The dial can be turned in either direction to
select a cycle. Once started, the dial will not
advance at a specific rate during the Auto
Dry/Sensor Dry cycles. At first the dial may not
advance at all. Toward the end of the cycle (when
the load begins to dry), the dial will advance at a
more regular rate and much more quickly. This is
normal operation.
4