Productspecifications - Craftsman 351.229000 Manual De Instrucciones

15=in. Drill Press with Laser=Trac
TM
Depth
Scale Yes
Column Diameter 2-7/8" (73mm)
Motor Specifications: Base Work Area 10-1/4" wide x 8-1/4"
Continuous duty HP 1/2 depth
Amps 8.6 Depth of Throat 7-1/2"
Volts 120 Height 67-1/4"
Phase Single Width 12-1/2"
Hertz 60 Depth 27-1/2"
R.RM. 1725 (no load) Weight 180 pounds
Product Specifications:
Belt Type
Pulley Type
Belt Tensioning
Number of Speeds
Drill Speeds
Spindle Taper
Chuck Taper
Chuck Type
Chuck capacity
Chuck to Table dimension
Min.
Chuck to Table dimension
Max.
Chuck to Base dimension
Quill Diameter
Quill Travel
Quill Lock
Handle Operation
Motor Control
Table Size
Table Tilt
Table Movement
Table Material
Depth Stop
Depth Stop Type
Poly-V
Step
Sliding motor
12
300, 400, 450, 600,650,
700, 1100, 1600, 1700,
1900, 2600, 31 O0
#2 Morse Taper
Jacobs 3
Keyless
0.040"- 5/8" (1-16mm)
0_
24 _
43-3/4"
1-7/8" (47mm)
4 _
Yes
360 degree rotation
Toggle with removable
key
12" wide x 12" depth
Yes
Rack and pinion
Cast Iron
Yes
Quick Set
Convenience:
Light Yes, left or right side
mount
Laser Yes
To avoid electrical shock to yourself and damage to the
drill press, use proper circuit protection. Do not expose
to rain, or use in a damp environment.
The drill press is factory wired for 120V, 60 Hz, opera-
tion. Connect to a 120V, 15 amp branch circuit and use
a 15 amp time delay fuse or circuit breaker. The electri-
cal circuit cannot have any wire size less than #14. To
avoid shock or fire, replace power cord immediately if it
is damaged in any way.
CALIFORNIA PROPOSITION 65
Some dust created by using power tools contains
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm. Some
examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks, cement, and other
masonry products.
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work.
To reduce your exposure to these chemicals: work in a
well-ventilated area, and work with approved safety
equipment, such as those dust masks that are specially
designed to filter out microscopic particles.