Maintenance Instructions - INDUSTRIAS TECHNOFLEX KN-16 Manual De Instrucciones

Ocultar thumbs Ver también para KN-16:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

For best compaction, the shoe must hit the ground flat, not upflit or push down the machine to make
it on its toe or heel. Otherwise, it will cause the machine to damage.
Alter starting and warming up the machina, pull the control handle forward quickly. Don't let the
throttle in ½ of the full position. Otherwise the r ammer Hill jump disorderly and the clutch Hill in
the state of half-startup, thereby wear the clutch sharply and mangle the engine.
The rammer Hill tip easily if the ground is rouge. Please operator carefully to avoid sprain the
wrist or other parts of the body.
Never leave the machina unattended.
Never run the machina on firm surface Duch as concrete.
1.8

Maintenance instructions

Before performing any maintenance on this unit, ALWAYS MAKE CERTAIN that the switch is in the
"OFF" position and the power cord is disconnected from the power source.
Engine oil
Air cleaner
Carburetor settling
cup
Spark plug
Silencer
Gasolina box and
filter
Valve gap
Oil pipe
ENGLISH
Every time
befote
operation
Examine oil
#
surface
Exchange
#
Examine
Clean
Clean
Examine and
clean
Clean
Clean
Examine and
adjust
Examine and
exchange
OPERATION
ATENCIÓN
WARNING
Every
Every 3
month or 20
months or 50
hours
hours
#
Every 6
month or 100
hours
#
#
#
#
#
1B
Every year
or 300
hours
#
#
#
1B-7
Tabla de contenido
loading

Tabla de contenido