Programming Mode - Waring Commercial WMO120 Manual Del Usuario

2) The screen displays the remaining cooking time. With multi-
stage cooking, the total remaining cooking time is displayed,
and not the cooking time for any particular stage.
3) If the program chosen exceeds the maximum time allowed
by User Option 7, the oven will rapidly beep three times and
display 0:00 to indicate that the program is unacceptable.
4) When the cooking program is finished, the oven will enter
End of Cook Cycle Mode. If you press STOP in this mode,
the oven will enter Pause Mode.
ON-THE-FLY COOKING MODE
Allows the user to add time while cooking.
1) Press the desired number key during cooking to add time.
The longer cooking cycle will begin automatically.
2) The screen displays the new remaining cooking time. When
cooking program is finished, the oven enters End of Cook
Cycle Mode.
3) To stop cooking before the end of the cooking cycle, press
STOP. The oven will enter Pause Mode.

PROGRAMMING MODE

This mode allows the user to assign cook times and power levels
using a one-touch button.
1) Open the door and press number button 1 for five
seconds. The buzzer will sound once and the oven enters
Programming Mode.
2) PROGRAM is displayed.
3) Press any number button, 0 to 9, and the screen will display
the saved time. You can then input the time you need.
4) Press HOLD 0%, Defrost 20%, Medium 50% or Med-Hi 70%
to input the power level. The screen will display the related
power. If the same button is pressed twice, the power will
change to PL10, which is the 100% power level. If no power
is chosen, PL10 is the default.
5) To change the cooking factor: If you press X2, the screen will
display CF:XX. The default cooking factor is 80%, and CF:08
is displayed. If you need to change the cooking factor, just
press one of the numbered buttons (1 for 1%, 2 for 20%, etc).
14