ION Telesounds Guia De Inicio Rapido página 4

Headphones
1. Power Button: Press and hold this button for about 2 seconds to power the headphones
on or off. If the headphones detect no audio signal for about 5 minutes, they will power off
automatically to save battery power.
2. Status Light: This light indicates the status of the headphones:
• Red: The headphones are powered on but not connected wirelessly to the transmitter.
• Flashing red: The headphones are low on battery power. To charge them, place the
headband of the headphones on the charging dock on top of the transmitter (make
sure that the transmitter is connected to a power outlet and that its Power switch is
set to On). See
• Green: The headphones are powered on and connected wirelessly to the transmitter.
• Off: When the headphones are charging on the transmitter, the light will turn off
when they are fully charged. When the headphones are not charging and powered
off, the light will be off.
3. –/+: Use these buttons to raise or lower the volume of the headphones.
4. Audio Input (1/8" / 3.5 mm): Connect this input to the audio output of another device
(smartphone, tablet, computer, etc.) to use the headphones in a normally ("wired").
4
3
2
Setup > Powering the Headphones
1
4
to learn more.