Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Features
Transmitter
Front Panel
1.
Charging Dock: Place the headband of the headphones on
this dock (on top of the transmitter) to charge them. Make
sure that the transmitter is connected to a power outlet and
that its Power switch is set to On.
2.
Charge Light: This light is green when the headphones
(placed on the charging station) are charging. It will turn off
when the headphones are fully charged.
3.
Power Light: This light is blue when the transmitter is
powered on. If the transmitter detects no audio signal for about
5 minutes, the transmitter will enter a low-power mode to save
energy. When it detects an audio signal again, it will return to
its normal power level and the light will be blue again.
4.
Optical/Coaxial Light: This light is red when the source
switch on the rear panel is set to Optical or Coaxial (see
below). The light will flash when the transmitter detects an
issue with the incoming digital signal (see
this happens).
Rear Panel
5.
Power Input: Using the included power adapter, connect this
power input to a power outlet.
6.
Power Switch: Set this switch to On or Off to power the
transmitter on or off, respectively.
7.
Audio In: Connect at least one of these connectors to an
audio output on your TV:
• Right & Left: Use the included RCA-to-RCA cable to
connect these to your TV's RCA stereo outputs.
• Coaxial: Use the included coaxial cable to connect this
to your TV's coaxial output.
• Optical: Use the included optical cable to connect this
to your TV's optical output.
8.
Source Switch: Set this switch to the type of Audio in
connection you want to use:
• Audio: Select this to use the RCA (Right & Left) inputs.
• Coaxial: Select this to use the Coaxial input. (The
Optical/Coaxial Light on the front panel will light red.)
• Optical: Select this to use the Optical input. (The
Optical/Coaxial Light on the front panel will light red.)
9.
Att.: If you connected the transmitter to a TV, receiver, DVD
player, or hi-fi system, set this switch to -8 dB. If you
connected it to CD player, smartphone, tablet, or computer,
set it to 0 dB.
Troubleshooting
if
1
2
3
4
8
9
7
7
7
6
5
3
Tabla de contenido
