Troubleshooting - Altec Lansing MP450 Guia Del Usuario

Troubleshooting

Symptom Possible Problem
AC adapter isn't plugged into a wall outlet or the
connector isn't plugged into the power supply jack
on the back of the speaker system.
Speaker system
doesn't respond
Wall outlet is not functioning.
(no power)
The power isn't turned on.
iPad doesn't iPad didn't install properly.
dock properly
iPad is not installed properly.
iPad doesn't
respond to the Your iPad software is too old.
speaker system
or remote
iPad is locked up.
10
Solution
Plug the AC adapter into a wall outlet and plug the connector into the power
supply jack on the back of the speaker system.
Plug another device into the same outlet to confirm the outlet is working.
Turn on the speaker system by pressing the
lights up.
Remove your iPad from the dock and check for obstructions on the
connectors in the dock and on your iPad. Then reseat it in the dock.
Remove your iPad from the dock and check for obstructions on the
connectors in the dock and on your iPad. Then reseat it in the dock.
Upgrade software on your iPad. For details, visit
www.apple.com/iPad/download.
Please make sure your iPad is working properly before docking into the unit.
Please refer to your iPad manual for details.
button. The Power LED