ECOFOREST TOKIO Manual De Instalación Y Mantenimiento página 36

WI-FI ANTENNA CONNECTION, POWER CABLE AND ROOM THERMOSTAT.
The stove is supplied together with two Ecoforest boxes. One of them contains the user manual, the
installation and maintenance manual, a power cable, a room sensor and a cleaning brush. The other box contains the
tablet, its support, the tablet's power source and the wi-fi antenna (except for models London, Córdoba, Córdoba
Glass and ECO III insert, which have it integrated), a wi-fi module (except for models London, Córdoba, Córdoba Glass
and ECO III insert, which have it integrated) and their corresponding manuals.
In models ECO III and París, the user has to attach the wi-fi antenna and module to the connection platform
(check section 1 of the user manual). The connection platform of the wi-fi antenna is supplied attached to the rear of
the hopper.
The room sensor and power cable must be connected to the rear heaters, in the right-hand side of the stove.
The location of the ON-OFF pushbutton varies depending on the stove model:
London: Open the hopper lid.

París: Right-hand side of the "top".

Córdoba Glass: Right-hand side of the stove, on top of the glass framework's grid.

Córdoba: To the right of the pellet tray. Pull it in order to access the button.

Tokio: Over the stove's power connection.

ECO III: Over the stove's power connection (drawing 14).

ECO III insert: On top of the grid of the right-hand framework.

Section 5 of the user manual is devoted to the use and functions of this pushbutton.

ON-OFF Pushbutton.

Power connection ~230/240V - 50Hz.

Thermostat connection.
5. CLEANING AND MAINTENANCE.
To ensure the correct operation of your stove, the following cleaning and maintenance operations are
necessary at the indicated frequency. The stove must always be cold.
The deterioration of the stove parts by a lack of cleaning involves the loss of the two-year warranty offered
by ECOFOREST (see warranty section).
5.1. Ash in the fireplace.
When opening the door, you reach the burn pot where combustion takes place; hoover it and remove it
(make sure you'll put it back properly) in order to clean all holes; make sure they're clean and hoover the
support of the burn pot as well. In the Paris and London models, the user must only remove the pot for
cleaning when the provisions set forth in section 5.6. are met.
LOCATION OF THE ON/OFF PUSHBUTTON.
DAILY CLEANING WHEN THE STOVE IS COLD.
Drawing 15
35
Drawing 14