Troubleshooting - Haojue DM125 Manual De Uso

(108) Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27

TROUBLESHOOTING

If the engine fails to start, please check the following to
help determine the cause.
1. Make sure there is sufficient fuel in the tank.
2. Make sure the fuel reaches the carburetor from the
fuel cock.
3. Cut off the fuel flow from the carburetor, open the fuel
cock and see if fuel flows out of the fuel hose.
BWARNING
Do not let fuel spill on to the ground; it should be
collected in a container. Do not move the fuel close
to a hot engine or exhaust pipe. When doing this
check, fire and fumes should be avoided, do not
move close to any fire source or heat source.
4. If fuel is reaching the carburetor, check the ignition
system next.
EN
5. Remove the spark plug, and connect it to ignition coil.
6. Fix the screwed part of spark plug onto the outer case
of engine, open ignition switch to the "*" position and
engine stop switch at the "*" position, and press the
electric startup button "#". If the ignition system is
normal, there will be blue sparks between the two
poles of the spark plug. If there is no spark, consult
your dealer for repair.
(108) Haojue DM125/DM125S 99011H2E120H000 V02 ES+EN+FR 2014-11-27
BWARNING
Do not fix the spark plug near the spark plug hole
for inspection, because combustible mixed gas is
likely to be ignited by the spark and result in a fire.
BWARNING
To reduce the possibility of electric shock, it is
advised to fix the metal casing of the spark plug
on an unpainted metal surface of the motorcycle
frame. Persons with heart disease or pacemakers
should not do this inspection.
BCAUTION
You are advised to consult your dealer before
proceeding with repairs. Your dealer will assist you
in solving problems.
46