Garmin ecoRoute Manual Del Usuario página 5

1. Connect the ecoRoute HD connector
to the OBD II connector in the
vehicle.
2. If securing with double-sided
mounting adhesive, clean the area
where you will place the adhesive.
Vehicle OBD II connector
ecoRoute HD connector
3. Secure the ecoRoute HD device
and cable to the vehicle using the
cable ties or double-sided mounting
adhesive. Secure the device away
from the foot pedals and the driver's
feet.
LED
Cable ties
RESET key
ecoRoute HD device
Customizing the Cable Angle
If the vehicle requires the cable to be at
an angle from the connector, you can
use the cable ties to customize the cable
for the installation.
1. To better suit some installations,
bend the cable around the connector.
2. Use a cable tie to secure the cable.
Wirelessly Connecting
with a Garmin GPS Device
Before wirelessly connecting with a
GPS device, you must update the GPS
device software and install the ecoRoute
HD device.
1. Start the vehicle, but remain in park
(stationary).
The LED blinks three times every
two seconds. The ecoRoute HD
device is waiting to connect with the
GPS device.
5