Connecting To An Amplifier; Remote Control - Insignia NS-DVDVCR Guia Del Usuario

Audio connection
To connect to your TV with audio source:
• Connect the Left and Right AUDIO OUT
jacks on the DVD/VCR to the audio left and
right in jacks on the TV using the supplied
audio cables.

Connecting to an amplifier

Audio
cable
R
L
AUDIO INPUT
Back of amplifier/receiver
To connect two-channel analog stereo or
Dolby Pro Logic II/Pro Logic:
• Connect the left and right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the
DVD/VCR to the audio left and right in jacks
on your amplifier, receiver, or stereo system
using the audio cables supplied.
To connect a two channel digital stereo
(PCM) or A/V receiver with multi-channel
decoder:
1 Connect the player's DIGITAL AUDIO OUT
jack (coaxial) to the corresponding in jack on
your amplifier. Use an optional digital coaxial
audio cable.
2 Activate the DVD/VCR's digital output. (See
"Audio Settings" on page 13).
Digital multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this you need a
multi-channel audio/video receiver that supports
one or more of the audio formats supported by
your DVD/VCR, including MPEG 2, Dolby Digital
and DTS. Check the receiver manual and the
logos on the front of the receiver to verify this.
Notes
• Due to the DTS Licensing agreement, the
digital output will be in DTS digital out when
DTS audio stream is selected.
• If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
• To play six-channel digital surround sound
though a digital connection, your receiver must
have a Digital Multi-channel decoder.
• To see the audio format of the current DVD
displayed on the screen, press AUDIO.
• Your DVD/VCR does not perform internal
(2-channel) decoding of a DTS sound track. To
enjoy DTS multi-channel surround, you must
connect your DVD/VCR to a DTS compatible
receiver through one of your DVD/VCR's digital
audio outputs.
Back of DVD/VCR
Coaxial
digital
cable
COAXIAL
DIGITAL INPUT
www.insignia-products.com
Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic," and the double-D symbol are trademarks
of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital
Theater Systems, Inc.
Accessory audio/video (A/V) connections
OR
To connect the DVD/VCR to an accessory
component:
• Connect the VCR IN LINE1 (back) or LINE2
(front) jacks on the DVD/VCR to the
audio/video out jacks on your accessory
component, such as a VCR or camcorder,
using the optional audio/video cables. (Refer
to "Recording with the VCR" on page 16.)

Remote control

The remote control requires two AAA (RO3)
batteries. We recommend that you replace the
batteries on a yearly basis or when the operation
of the remote control becomes intermittent or
unsatisfactory. Replace the original batteries
with new AAA batteries. Do not mix old and new
batteries or different types of batteries.
To replace the batteries:
1 Press the lock tab of the battery holder and
open the battery compartment.
2 Place two AAA batteries in the battery holder,
matching the + and – in the battery
compartment.
Accessory components
include: VCR camcorder,
video camera, satellite
receiver, or laser disc
player.
Jack panel of accessory
OR
9