Holmatro GRA 43 Serie Manual página 43

Description
Battery Pouch
Greenline Battery Charger
Mains Power Connector
A Pulling Chains, Set
B Pulling Attachments Set
C Pulling Chains, Set in Case
D Wedge Piece
E Base Plate, Round
F Conical Tip
G Rim Adapter, Set
H Ram Support
I
J Ram Heads
K Accessory kit
L
M Extension Pipe
N
O
P Connection Piece
3.11 Ram head
Two ram heads are delivered by default with every ram jack. Extra ram heads can be ordered if desired.
3.12 Ram support
The ram support is an accessory used for bodywork in an unstable condition. It provides a safe push-off
point to prevent slipping. The ram support has three push-off points and can be used in combination
with every ram jack. The push-off points are recognizable as round bars on which the ram head can be
placed.
3.13 Conical tip
The conical tip has a sharp point and can be used to make a hole in a plate. It can be placed on the end
of the plunger and/or fixed side, instead of the ram head.
3.14 Rim adapter set
The Holmatro rim adapter set consists of:
• a storage/carrying case
• a tilting saddle
• an adapter for rim and steering column
• a support plate
• two tensioning belts
GRA 43** EVO 3
mains voltage GRA 4321 EVO 3 GRA 4331 EVO 3
BCH1 220-240 VAC
BCH2 100-120 VAC
BCH3 12-24 VDC
BMC1 220-240 VAC
BMC2 100-120 VAC
HRS 22
HRS 22 NCT
AS 4300 A
AS 4300 B
165 mm
330 mm
500 mm
916.001.654_002
150.182.214
150.182.208
150.182.209
150.182.286
150.182.206
150.182.207
150.582.152
150.582.281
150.582.021
150.181.324
150.181.326
150.181.325
150.182.580
150.181.011
150.003.105
150.014.062
150.182.269
150.182.296
150.006.373
150.006.372
150.006.204
150.182.295
EN
43