Thunderbay Y43 Manual De Funcionamiento página 5

ASSEMBLY TOOL S REQUIRED
Two (2) 9/16" Wrenches
ASSEMBLY INSTRUCTIONS ( SEE FIGURE 1)
1. Insert output shaft of Y43 transmission (A) in the open end of
Flex Coil Shock Top (B)
2. Line up bolt holes through Flex Coil Shock Top and output
shaft of the transmission
3. Place included 3/8 -16 x 1.5" bolt (C) through bolt hole
4. Hand-thread 3/8-16" lock nut (D) onto bolt
5. Using two 9/16" wrenches, securely tighten nut and bolt
Y43 and YZ06 are shown. Instructions also apply to YZ08 and
YZ10 augers
During the assembly process or
while operating or maintaining
your auger, if you have any
questions,
Authorized Service Center at the
toll free number listed above.
please call our
ASSEMBLY INSTRUCTIONS AND PARTS EXPLOSIONS
Y43 Model
5