Cable Management - PRG UNV Manual De Instalación, Funcionamiento Y Servicio

Cable Management

9
To make an opening to route cables through
projector mount assembly, adjust projector mount
assembly to full upward tilt position by turning knob
for tilt adjustment as shown in figure 10.1. Left or
right roll position can be adjusted if more space is
required.
NOTE: Be certain tamper resistant screws are
not engaged before making adjustments (see
step 9-1).
Route cables through top of extension column as
shown in figure 10.2 and figure 10.3.
Note: A method for assisting cables through
extension column may be required (example: string
tied to connector to help pull through extension
column).
Route cables through projector mount assembly as
shown in figure 10.4 and connect to projector.
EXTENSION
COLUMN
fig. 9.2
fig. 9.4
KNOB FOR ROLL
ADJUSTMENT
fig. 9.1
fig. 9.3
CABLES WITH COMBINATION
OF VGA CONNECTOR
AND RCA PLUGS
BEND WIRES OF RCA
PLUGS IN OPPOSITE
DIRECTION
ROUTE
CONNECTOR
THROUGH
FIRST
DO NOT
CRIMP
WIRES
KNOB FOR TILT
ADJUSTMENT
OPENING FOR
ROUTING CABLES
NOTE: INNER DIAMETER OF
EXTENSION COLUMN MAY NOT
ALLOW PASSAGE FOR ALL
CONNECTOR TYPES.
CABLE
CONNECTOR
INNER
DIAMETER OF
EXTENSION
COLUMN