Overview - Resol DL2 V2 Manual

1

Overview

This additional module enables the acquisition and storage of large amounts of
data (such as measuring and balance values of the solar system) over a long period
of time. System access is possible with just a few clicks via VBus.net – without any
network knowledge or tedious router configuration. For transmission of the data
stored in the internal memory of the DL2 to a PC, an SD card can be used.
The DL2 is appropriate for all controllers with RESOL VBus
connected directly to a PC or router for remote enquiry and thus enables comfort-
able system monitoring for yield monitoring or for diagnostics of faults.
Different solutions for visualisation and remote parameterisation are availabe on
the RESOL website www.resol.com. On the website, firmware updates are also
availabe.
16
• With VBus.net support
• Easy visualisation of the measured and balance values of your system
• Logging system performance data over longer periods of time
• Converting and exporting logged data
• Quick fault diagnosis
® . The datalogger can be
• Compatible with all RESOL controllers equipped with a VBus
• Transfer data with an SD card – no network connection required
• Integrated LAN connection for network connection
Technical data
Housing: plastic PC-ABS and PMMA
Protection type: IP 20 / EN 60529
Ambient temperature: 0 ... 40 °C
Dimensions: Ø 130 mm, depth 45 mm
Mounting: wall mounting
Display: bar LED for monitoring the memory capacity, 1 illuminated push button
for indication of the SD card status
Interfaces: RESOL VBus
Power consumption: 1,75 W
Power supply:
input voltage of mains adapter: 100 ... 240 V~, 50-60 Hz
rated current: 350 mA
input voltage of Datalogger: 5V ⎓ ± 5 %
for the connection to the controller, LAN
®
®