CHIEF SMART-LIFT SL151i Instrucciones De Instalación página 10

SL151i
Pushbutton (Supplied on some models) (Momentary SPST)
ASP-401
12V Trigger (will actually work with 5-30V AC or DC)
IR-10
RC-10
Low Voltage Wall Switch or Relay Control
Error Reversing (contact between error input and common indicates an error and unit reverses direction)
Relay Contacts (relay closes when unit reaches end of travel)
EXTERNAL WIRING
NOTE:
The numbers listed in the SL151i Internal and SL151i External columns refer to the corresponding numbers located where
indicated in the wiring pictures. (See Figure 16)
10
Table 1: WIRING TABLE
Accessory\Product
Figure 16
SL-150/151 Internal
Red 2 (24V AC - Comm)
Black 6 (Extend/Retract - Comm)
Other Jumper 1 & 5
Up 12 (retract)
Down 11 (extend)
Open N/A
Close N/A
Left N/A
Right N/A
Common 13 (ground)
12V+ 7 (trigger +)
Ground 8 (trigger -)
+12V 4 (12V DC)
GND 3 (ground)
C1 12 (retract)
C2 11 (extend)
C3 No Connection
COMM 13 (ground)
(radio power) - Red 1 (24V AC)
(relay) - Black 6 (Extend/Retract - Comm)
(24V) - White 2 (24V AC - Comm)
Other Jumper 1 & 5
Up 12 (retract)
Down 11 (extend)
Service N/A
Open N/A
Close N/A
Sequence (Show Mode) N/A
Stop N/A
Left N/A
Right N/A
Common 13 (ground)
Extend Error 14 (extend error)
Retract Error 15 (retract error)
Common 13 (ground)
Extend Relay a 16 (extend relay in)
Extend Relay b 17 (extend relay out)
Retract Relay a 18 (retract relay in)
Retract Relay b 19 (retract relay out)
Installation Instructions
SL-150/151 External
2 (24V AC - Comm)
5 (Extend/Retract - Comm)
Jumper 1 & 6
3 (retract)
4 (extend)
N/A
N/A
N/A
N/A
9 (ground)
N/A
N/A
10 (12V DC)
9 (ground)
3 (retract)
4 (extend)
No Connection
9 (ground)
1 (24V AC)
5 (Extend/Retract - Comm)
2 (24V AC - Comm)
Jumper 1 & 6
3 (retract)
4 (extend)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
9 (ground)
8 (extend error)
7 (retract error)
9 (ground)
14 (extend relay in)
12 (relay out common)
13 (retract relay in)
12 (relay out common)
INTERNAL WIRING