Idiomas disponibles
Idiomas disponibles
Before using the food processor, wash all parts except the Base in hot, soapy water.
Rinse dry. These parts can also be placed in the dishwasher on the top rack. Do not
put in or near the utensil basket.
CAUTION: Blades are sharp. Handle carefully.
CAUTmON:NEVER place food processor's motor/base in water
or other liquids.
NOTE: DO NOT attempt to chop ice in this Food Processor; it will damage the
Bowl and dull the Chopping Blade. This unit will not whip cream, beat egg
whites to a desirable volume, grind coffee beans, spices or other items with
high oil content, or slice or shred hardboiled eggs, marshmallows,
or soft cheeses.
IMPORTANT: For your protection, this unit has an interlock system.
Base and Cover is properly locked onto the Bowl. Do not attempt to operate
the unit without
the Bowl, Bowl Lid, and Food Chute Lid correctly
in place.
ASSEMBLY
1. Make sure the Control Knob is in the OFF position and the power cord
is unplugged.
2. Be sure Food Processor base is on a fiat, dry, clean, stable surface before you
begin processing.
,
To assemble, put the Bowl on the Base by aligning
the Bowl handle with the
Unlock icon on the base. Lock the Bow! onto the Base by turning the Bowl
counterclockwise
until it clicks into place. Once locked, the Bowl handle will
face front and center (see Fig. 1).
NOTE: There is only one position for the Bowl to lock onto the Base. The unit will not
operate if the Bowl does not lock onto the Base.
ASSEMBLY cont.
Fig. 2a
4. Placethe BowlCover ontothe Bowl. Align the arrowon the Coverwith the
Unlock icon on the Bowl (seeFig. 2,2a and 2b). Turnthe Cover counterclockwise
towards the center front until it clicks.
NOTE: There is only one position for the Bowl Cover to lock onto Bowl. The unit will not
operate if the Bowl Cover does not lock onto the Bowl, or if the Large Food Pusher is not
inserted into the Oval Food Chute.
Th_r_
i_ n Fr_r_A PH_h_r
A_mhl_
rnn_i_flnn
n_ _ Jrlr_
rlnN __mnll
PHCh_r
Allr.n
÷h_
raised seam running down the back of the Large Pusher with the slot in the Interlock
Start Switch. insertthe Large Pusher into the Oval Food Chute. Then insert the Small
Pusher into the Circular Food Chute in the Large Pusher.See Fig. 3 and 3a.
Fig. 3
Fig. 3a
