Place Of Installation; Power Handling - Vision SP-1800 Manual De Propietario

PLACE OF INSTALLATION

Avoid installing this product under the following conditions:
• Moist or humid places
• Places exposed to direct sunlight or close to heating equipment
• Extremely cold locations
• Places subject to excessive vibration or dust
• Poorly ventilated places
Do not expose this product to dripping or splashing. DO NOT PLACE OBJECTS FILLED WITH
LIQUIDS ON OR NEAR THIS PRODUCT!
PACKAGING
Save all packing material. It is essential for shipping in the event the unit ever needs repair.
NOTE: If original packaging is not used to return the unit to the service centre, damage in
transit will not be covered by warranty.

POWER HANDLING

Power rating with regards to loudspeakers denotes how much power the loudspeaker can
handling for a sustained period of time without distortion. These speakers are rated to accept
up to 50 watts RMS.
WATTS
The most consistent standards for measuring watts are "Program Power" and "RMS" because
these measure average sustained levels. Any low impedance amplifiers with an output of 2 x
10w - 2 x 50w (@ 8 ohms) are suitable for use with these speakers.
NOTE: The power output from an amplifier depends on the number of loudspeakers attached.
8 ohms normally denotes two loudspeakers attached
4 ohms normally denotes four loudspeakers attached
3
SP-1800_manual_en.doc