ASROCK ALiveNF5-eSATA2+ Manual Del Usuario página 30

STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
After step 1, 2, 3, you can start to install Windows
64-bit OS on your system. At the beginning of Windows
third-party RAID driver. When prompted, insert the SATA / SATAII driver diskette contain-
ing the NVIDIA ® RAID driver. After reading the floppy disk, the drivers will be presented.
Select the drivers to install. The drivers are as below:
A. NVIDIA RAID Driver (required)
B. NVIDIA nForce Storage Controller (required)
Please select A and B for Windows
RAID drivers needed for RAID mode, you have to select them separately. Please specify
the first RAID driver and then specify again for the second one.)
NOTE. If you install Windows
HDDs and want to manage (create, convert, delete, or rebuild) RAID functions
on SATA / SATAII HDDs, you still need to set up "SATA Operation Mode" to [RAID]
in BIOS first. Then, please set the RAID configuration by using the Windows RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
2.14.2 Installing Windows 2.14.2 Installing Windows 2.14.2 Installing Windows 2.14.2 Installing Windows 2.14.2 Installing Windows
RAID F RAID F unctions unctions
RAID F RAID F RAID Functions unctions unctions
If you want to install Windows
HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
®
Insert the Windows Vista
to boot your system, and follow the instruction to install Windows
Vista TM 64-bit OS on your system. When you see "Where do you want to
3 0 3 0 3 0
3 0 3 0
ASRock
®
2000 / XP / XP 64-bit OS on your system.
®
2000 / Windows
® 2000 / XP / XP 64-bit in RAID mode. (There are two
® 2000 / Windows ® XP / Windows
Vista Vista Vista Vista Vista / Vista / Vista / Vista / Vista / Vista
TM TM TM
TM TM
®
® TM ®
Vista / Windows Vista
Advanced screen
® TM TM
Vista / Vista 64-bit OS on your system.
TM ® TM
/ Windows Vista 64-bit optical disk into the optical drive
ALiveNF5-eSATA2+ Motherboard
® ®
XP / Windows
®
setup, press F6 to install a
® XP 64-bit on IDE
64-bit With 64-bit With 64-bit With 64-bit With 64-bit With
TM TM TM
TM TM
TM
64-bit on your SATA / SATAII
IDE Configuration.
® Vista TM / Windows
XP
®