Personalisation; Setting The Temperature; Setting The Drying Cycle; Wash Options - Indesit XWDA 751680 Manual De Instrucciones

Personalisation

Setting the temperature

Press the TEMPERATURE button to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash
ting a temperature which is higher than the maximum value set for each wash cycle.
! Exception: if the 8 programme is selected, the temperature can be increased up to a value of 90°C.

Setting the drying cycle

Two different types of drying are possible: time-based and
level-based.
Press the TIME-BASED DRYING button
drying duration: 40'- 90'- 120' - 150'- 180'.
When the button is pressed for the first time, the selected time
will be the minimum time allowed for the set cycle.
When the machine has started the drying phase, press the TI-
ME-BASED DRYING button again to reduce the drying duration
that was set previously. The indicator lights will show the new
drying duration selected and the time remaining will consider
the time that has elapsed.
Press the LEVEL-BASED DRYING button
Cupboard : suitable for laundry which can be put back in a cupboard without being ironed.
ideal for clothes which do not need to be dried fully.
Hanger :
Iron : suitable for clothes which will need ironing afterwards. the remaining dampness softens creases, making them
easier to remove.
If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table of wash cycles),
perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the
drum. At this point, follow the instructions provided for a "Drying only" cycle. Repeat this procedure for the remainder of the
load. A cooling-down period is always added to the end of each drying cycle.
Note: if all the drying indicator lights are off, the machine will not perform the drying cycle.
Drying only
Press button to perform the drying-only cycle. After selecting the desired cycle (compatible with the type of garments), press
button to exclude the washing phase and start the drying phase at the maximum level for the selected cycle. The drying
level and duration can be set and changed by pressing the drying buttons
(Not compatible with cycles 13 and 14).

Wash options

The various wash options available with this Washer-dryer will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note:
- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will flash and
the function will not be activated.
- - If the selected option is not compatible with another previously selected option, the indicator light will flash accompanied
by a buzzer (3 beeps), and only the latter option will be activated; the indicator light corresponding to the activated option will
turn on.
Stain removal
This option allows for selecting the type of dirt so as to optimally adjust the cycle for removing the stains. The following types
of dirt can be selected:
- Food, for stains caused by foodstuffs and beverages, for example.
- Work, for grease and ink stains, for example.
- Outdoor, for mud and grass stains, for example.
! The wash cycle duration varies according to the type of selected dirt.
Press this button to reduce the spin speed.
Extra Rinse
By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
. The Washer-dryer will automatically prevent you from selec-
Table of drying times (guideline values)
Fabric
to set the desired type
Cotton
Synthe-
tics
Wool
to set the desired drying level:
Max.
Cupboard
Load type load
(kg)
Clothing of different
5
sizes, Terry towels
Sheets, Shirts, Py-
4
jamas, socks, etc.
Knitwear, Pullovers.
2
etc.
, .
GB
Hanger Iron
255 230 180
180 160 120
155 130 120
9