THOMSON DSC 323W Manual Del Usuario página 34

D - CONFIGURATION AND USE
1 2 3 4
11 12 13
1
Camera UID (unique code shown on the
camera)
Camera user name (default is
2
"admin")
Type of device: select "THOMSON IPC"
3
Name under which the camera will appear
4
in the software (according to your preference)
P2P connection: tick to add a camera using
5
its UID. The UID of each camera is a unique
code of 20 to 24 numbers and letters, shown
directly on the camera.
Current camera IP address
6
Camera password (none by default, leave
7
blank)
Test button for information entered:
8
enables you to check the connection,
user name and password entered
Current MAC address of the camera
9
Camera connection port (default 88)
10
Information related to the camera that you
11
are in the process of adding
Button that adds the camera with the
12
information shown at the top of the window
Results of a camera search on the
13
network connected to the computer
Search button: searches for cameras on the
14
network to which the computer is connected
• Carry out the following steps to easily connect
your camera:
• Check the "Connexion P2P [P2P connection]"
box.
12
EN
5 6 7 8 9
u . e i t y u r e c n s s o m o t h w . w w
1080P HD WIFI IP CAMERA
• Click the "Recherche [Search]" button to fi nd
10
your camera on the network to which your
computer is connected.
• In the list of cameras found, click the one you
wish to add to the software. The information
in the top part of the window is fi lled in
automatically when you select a camera from
the list.
• If necessary, change the user name and
password to connect to the camera (the default
user name is "admin" and the password must
be left blank).
• Click "Vérifi cation de la connexion [Check
connection]" to check the camera connection
and data entered.
• Finally, click "Ajouter [Add]".
When you connect your camera for the fi rst time,
you are immediately asked to change the user
14
name and password for camera connection, for
increased security:
Once you have modifi ed the user name and
password, the camera appears on the list on the
right side of the software's main screen. Drag the
line of your camera into one of the viewing windows
to display the image:
Note: it is possible to connect a camera that is not
present on the network to which the computer is
connected. In step 3 above, enter the camera UID
manually: as it is not on the same network it will not
be detected and fi lled in automatically.