Before You Begin The Installation - Luda Elektronik horseAlarm Guia Del Usuario

6. Before You Begin the Installation

Read through the instructions in this manual before you begin
installing you horseAlarm package.
Start with charging the receiver as it will be used later in the
installation process. The battery is only partly charged and
will therefore only work for a short while if not charged.
1. Connect the power adapter (12V) to the power
input of the receiver and then to a wall socket
(220V).
2. Check that the charging indicator is on.
A fully charged battery will last between 12 hours (With
background light ON) to 30 hours (With background light
set to AUTO)
nOTE!
Only use the 12V adapter marked Receiver to power
the receiver! Usage of any other power source may
damage the receiver and is NOT covered by the
warranty.
3. Connect power to the repeater by using the power adapter marked with Repeater/RadioLink
only. When you connect power to the repeater you will see a green flash.
4. Go to Chapter 7 - Understanding
and testing before use.
12V
- 11 -
DC
EN
DE
ES FR
FI
SV
IT
FR
PL
SV