Setting The Mould Alert - ADE WS 1700 Instrucciones De Operación

5. Then press MODE or wait approx. 10 seconds
until the indicator returns to normal mode.
6. Press the ALERT button to activate the
humidity alarm.
ALERT
humidity alarm is active.
As soon as the air humidity exceeds or underruns
the values set by you, the symbol
well as ALERT and the red LED alarm signal blink
(quickly).
Alarm duration: approx. 60 seconds.
‚ In order to stop the blinking of the LED
earlier, press any button.
‚ The blinking of
stops only once the measured air humidity
lies once again between the upper and lower
humidity limits or when you switch off the
humidity alarm entirely.
‚ In order to switch off the humidity alarm,
press the ALERT button once and
will no longer be displayed.

Setting the mould alert

1. Press and hold the DOWN button until the
symbols MOLD ALERT
in the upper part of the display and a value
blinks in the lower part.
42
is shown on the display; the
or
Hygrometer WS 1700/1701
or
as well as ALERT
RISK OF MOLD blinks
as
ALERT