2. Insert the batteries as shown on the base of
the battery compartment. Pay attention to
the correct polarity (+/-).
3. Close the battery compartment again.
Suggestions for changing the battery:
A change of batteries is necessary when the
battery symbol or nothing at all is shown
on the display.
Only use the type of battery that is specified
in the "Technical Data".
Always exchange all of the batteries at the
same time.
Dispose of batteries in an environmentally
appropriate way (see "Disposal").
Use
Setting the humidity alarm
1. Press the MODE button until a value and
blink simultaneously on the display.
Additionally, "ALERT" will be displayed.
2. Using the UP and DOWN buttons, set the
upper humidity limit (in 5% increments).
3. Press the MODE button again.
A value and
4. Using the UP and DOWN buttons, set the
lower humidity limit (in 5% increments).
Hygrometer WS 1700/1701
blink on the display again.
41