Configuration (Dmx); Starting Address; Dmx Personalities - Chauvet FREEDOM PAR Manual De Instrucciones

Configuration
(DMX)

Starting Address

DMX
Personalities
Freedom™ PAR/Strip Mini User Manual (Rev. 8 ML)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Freedom™ PAR and Strip Mini each use up to 4 DMX channels in 4-channel DMX
mode, which defines the highest configurable address to 509.
If you are not familiar
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
2. Use <UP> or <DOWN> to select SYS.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select SdAd from the menu.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select the starting address.
Press <ENTER>.
7.
The Freedom™ PAR and Strip Mini each have 2 DMX personalities. One is a basic
3-channel personality, and the other is a more advanced 4-channel personality.
To select either the Freedom™ PAR and Strip Minis' 3- or 4-channel personalities:
Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
1.
2. Use <UP> or <DOWN> to select SYS.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select d-CH from the menu.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select either the basic 3-channel mode (3CH) or the
advanced 4-channel mode (4CH).
7. Press <ENTER>.
with DMX, download the DMX Primer from
Page 15 of 76