Determining Water Flow - Calorex AW629 Manual De Instalación Del Propietario

4. DETERMINING WATER FLOW

Plumbing.
The machine must be plumbed in as shown, see diagrams below (a tear off label is attached to the machine on
delivery).
Adjust the flow rate until the flow light is illuminated, giving the correct flow rate. The "adequate flow" symbol
looks like this:
SYMBOL CHART- ALL MACHINES
FLOW LAMP ILLUMINATED,
=I
ADEQUATE FLOW
FLOW LAMP NOT
ILLUMINATED,
=0
INADEQUATE FLOW
POOL/SPA
PUMP
FILTER
WATER HEATING AFTER
6 MINS
I=
6 MINUTE DELAY
REMOVE AND DISPOSE
OF LABEL
POOL
WATER IN
REMOVE BUNGS
BEFORE
INSTALLING
MACHINE
CONDENSATE
DRAIN
MACHINE SIDE
AW629 AND AW829 FLOW RATE 115 LITRES PER MINUTE
MACHINE LABEL
Page 10
=I
=0
6 MINS
I=
D436858 ISS 1
POOL
WATER OUT
REMOVE BUNGS
BEFORE
INSTALLING
MACHINE