Replacing The Oven Light - Sage Smart Oven Pro BOV820 Guía Rápida De Inicio

REPLACING THE OVEN LIGHT

WARNING
Always unplug oven and let cool before replacing
bulb. Only use a 25-Watt, 220–240V, G9 type
oven bulb.
1. Remove the wire rack from the oven before
replacing the light.
2. The light is positioned on the left-hand side
of the oven cavity. Position your fingers on the
outside of the light housing and gently pull the
glass cover away from the oven wall to remove
it. If you are unable to pull the cover off, slide
a spoon into the left side of the light housing
and gently lever the glass cover off. Always
hold the glass cover with the other hand to
prevent the cover from falling and breaking.
3. Remove the used bulb by pulling it directly out
of its holder.
4. Use a soft cloth to insert the new bulb.
Do not directly touch the surface of the bulb
with your fingers as oil from your skin can
damage the bulb.
1. To reattach the glass cover, align the metal
hook with the left side of the light housing.
Slide the opposite end of the glass cover into
the metal bracket on the right side of the housing,
then push the metal hook into the left side of the
housing until it snaps securely into position.
EN
9