Using The Control Panel; Configuring The Starting Address - Chauvet SWARM 4 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4. O
PERATING

Using the Control Panel

Menu Map

Configuring the Starting Address

Swarm™ 4
I
NSTRUCTIONS
Access control panel functions using the four buttons located directly underneath the LED
display.
B
UTTON
Used to scroll through the current
<MODE/
operating mode, as well as back out of
ESC>
the current menu option
<DOWN>
Used to select a decreasing value
<UP>
Used to select an increasing value
Used to activate a selection and store it
<ENTER>
to memory
Mode
Selection 1
512
DMX Mode
AUTO
Automatic
Sound-active
SNd
The Swarm™ 4 fixture uses up to four DMX channels. In this DMX configuration/personality,
the highest configurable address is 509. Any address higher than this will prevent access to all
of the channels while in this mode; however, if you desire to use one of the other DMX
configurations (personalities), please consider the total DMX channels when selecting a DMX
address.
If this is your first time using DMX, we recommend reading the "DMX Primer" section in the
"Appendix".
F
UNCTION
Selection 2
Description
DMX Operation
A001~512
Select the DMX starting address
Trigger the built-in programs with variable
speed
S 01~S100
Adjust the speed of the automatic program
Trigger the built-in program to the beat of the
music, using the internal microphone
7
Rev. 3 ML
Tabla de contenido
loading

Tabla de contenido