Hkoenig SWR22 Manual De Utilización página 8

4. Press any key in host panel or Power off and
Docking keys in the remote control while the
cleaner is searching for the docking station, the
cleaner will then stop searching.
5. After the battery is used up, the first grid of the
charging icon will flicker, when the second and
then the third grid will flicker showing il is charging,
stop flickering after completing the charging.
Turn on the cleaner, full three grids show enough
6.
power, one grid missing means the decreased
power, and it should be charged after three grids
missing .
Automatic charging :
The cleaner will search the docking station for charging automatically in case of low battery during cleaning.
/,\ 1. The cleaner may !ail to find the docking station due to the obstacle, decreased battery and complex condition, so the
ill
docking station should be put in wide space.
2. When the cleaner finish cleaning, the temperature of the battery is very high ; so charging lime will be longer .
Assembly & disassembly and cleaning of dustbin
Assembly & disassembly of dustbin :
1. Extract the dustbin by pressing the red key on top.
2. Press the orange button on it, and then the blower
will pop up automatically.
3. Reverse the blower, release 2 fasteners and open
the cover.
4. Open the bracket and the filter will appear.
5. Change a new filter, press the semicircle bracket by
one hand to release the fastener from the filter
screen, and remove the filter grid by the other hand
and then change a new one.
�
.,
... ,, ... ,, ...
1 11 li 1
� ... � ... , ...
: :
111-+
� "' * fP
, ,
:
�
-- �
"'
1uo+