Programming - BURGER KING DHB-BK Serie Manual De Instrucciones

There are six menus available:
1
BKFT LED ON = Breakfast1 or Breakfast2
REG LED ON = Regular1, Regular2, Regular3, or Regular4
Press and hold the DAYPART/ENTER Button, then use the UP
or DOWN Arrow Buttons to scroll through the 6 menus.
When scrolling, menus appears in this display
Press and hold the BURGER KING LOGO Button (on the but-
1
ton bar) until all the displays show P O and the pan buttons
LED's all glow red.
Press the PAN Button next to the display to be changed. The
3
LED will change from red to yellow and the display will
change from P O to the current product.
Press the UP or DOWN Arrow Buttons to scroll to the desired
product.
Press the DAYPART/ENTER Button to save the selection. All
other displays will display P O .
DHB-BK1 541-520 Rev. D
Selecting Breakfast and Regular Menus
Programming the Menus
Product Holding Bin
When the desired menu is displayed, release the
2
DAYPART/ENTER Button. The food products for the menu will
be displayed in the upper and lower PAN DISPLAYS.
When you change to a new menu, any timers started before the
change will flash the product name from the previous menu.
Press the PAN Button next to the flashing display to cancel the
timer and stop the display from flashing.
Press and hold the DAYPART/ENTER Button, then use the UP
2
or DOWN Arrow Buttons to scroll through the 6 menus.
Release the DAYPART/ENTER Button when the desired menu
is displayed.
When the DAYPART/ENTER Button is released, all displays
will again show P O .
Repeat Steps 2 – 3 as required.
4
Press the BURGER KING LOGO Button to exit the
Programming Mode.
NOTE: A pan may be set as "not used" by assigning "----" as
its product.
6
DHB-BK Series
Printed in USA 0506 © 2003