Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. 'Must know' features and facts
2.1 Ultra high efficiency "green" battery charger
With up to 95% efficiency, these chargers generate up to four
times less heat when compared to the industry standard.
And once the battery is fully charged, power consumption reduces
to 0.5 Watt, some five to ten times better than the industry
standard.
2.2 Durable, safe and silent
-
Low thermal stress on the electronic components.
-
Protection against ingress of dust, water and chemicals.
-
Protection against overheating: the output current will reduce
as temperature increases up to 60°C (140°F), but the
charger will not fail.
-
The chargers are totally silent: no cooling fan or any other
moving parts.
2.3 Reverse polarity protected
In case of wrong polarity connection, the external ATO blade fuse
will blow. Check the polarity of the cable and check the correct
value before replacing the fuse.
2.4 Recovery function for fully discharged batteries
Most reverse polarity protected chargers will not recognize, and therefore
not recharge a battery which has been discharged to zero or nearly zero
Volts. The Blue Smart IP67 Charger however will attempt to recharge a
fully discharged battery with low current and resume normal charging
once sufficient voltage has developed across the battery terminals.
2.5 Temperature compensated charging
The optimal charge voltage of a lead-acid battery varies inversely with
temperature. The Blue Smart IP67 Charger measures ambient
temperature during the test phase and compensates for temperature
during the charge process. The temperature is measured again when the
charger is in low current mode during float or storage. Special settings
for a cold or hot environment are therefore not needed.
9
Tabla de contenido
