Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PART FIGURE (rear view)
1. Rear guard
2. Front guard
3. Blade Set
4. Speed Switch
5. Knobs-Vertical airflow angle adjustment
6. Base
IMPORTANT：
Install the knobs (Obtain from the UCG bag)
on both sides of the fan body as shown
in Fig.1.
OPERATING INSTRUCTIONS
1. Turn switch (A) to desired fan speed:
Off, High, Med, Low. (Fig.2)
2. To adjust vertical airflow angle,
loosen the knobs (B) on the sides
of the fan. Tilt fan body (C)
to the desired angle and
retighten the knobs. (Fig.3)
MAINTENANCE INSTRUCTIONS
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed,or call Customer Assistance at
866-646-4332.
1. Before cleaning fan, always unplug it from the electrical outlet.
2. To ensure adequate air circulation to the motor, use a vacuum to keep vents
at the rear of the motor housing free from dust, fluff, etc. Do not disassemble
fan to remove dust or fluff.
CAUTION: To avoid injury from electrical shock, unplug the fan before using a
vacuum cleaner to clean the vents.
3. Wipe the exterior parts with a soft cloth soaking a mild detergent.
Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use gasoline or paint thinner as a cleaner.
4. Do not allow water or any other liquid into the motor housing or interior parts.
1
5
Fig.2
2
2
Fig.1
Fig.3
3
4
5
6
Tabla de contenido
