Orima ORD-651 Manual De Instrucciones página 11

6. If the supply cord is damaged, it must be replaced by the manufacturer, its services agent or similar qualified
persons in order to avoid hazard.
7. Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
8. In case of power failure, you will need to reset the clock. Otherwise, the oven will not operate (Digital Timer).
9. Usage of your appliance creates moisture and heat in the room; make sure that your kitchen is well ventilated.
10. When the oven is being used, some parts may become hot; children should be kept away and supervised at all
times.
11. When the oven is hot never touch the oven glass by hand.
12. Before starting to use your appliance, keep curtains, paper or inflammable things away from your appliance. Do
not keep combustible or inflammable things in or near the appliance.
13. This oven is produced for domestic cooking purposes only. Please do not use for any other purpose.
14. When connecting to a cooker panel, the supply switch must have a double pole switch with contact separation of
3mm min
15. Use glove when using cooker. Do not touch on hot surfaces.
16. Do not splash water onto the cooker.
17. Do not use cooker in potentially explosive atmospheres.
18. Do not carry cooker by holding from handle
19. Some models are supplied without a plug-an-lead set. In this case please use a flexible cable to suitable for
connection to mono phase: H05 VV-F 3 G 4 mm2 or for 3 phase: H05 VV-F 5 G 1.5 mm2
1. Please check that the electrical supply is connected and turned-on to the oven
2. Please check that there is electricity supply to the property.
3. Please check the fuse.
4. Please check the clock / auto programmer is set to the manual mode.
5. If you cannot solve the problem, contact the manufacturer-supplier, services agent or similar qualified persons.
IF THE OVEN DOES NOT OPERATE
DESCRIPTION OF OVEN and CONTROL PANELS