GE G154 Manual Del Propietário página 5

D
The chart below will help you match the wash cycle setting with your items. The chart is ranked from greatest to least
wash intensity.
Your washer may not have all these cycles. (Cycles vary by model.)
Whites For heavy to lightly soiled cottons, household linens, work and play items.
(Regular Wash/Fast Spin)
Colors For non-colorfast cottons and blends and items that are labeled cold wash.
(Regular Wash/Fast Spin)
Permanent Press For wrinkle-free and permanent press items, and knits.
(Pulsed Wash/Fast Spin)
Rinse & Soak For rinsing chlorine, perspiration, stains, etc., out of items. (Followed by Drain & Fast Spin.)
Drain & Spin For draining the tub and spinning water out of the clothes. (Fast Spin)
FAQ
Q: What is the difference between Heavy and Light settings?
A: For Whites and Colors, the wash agitation time is increased by 6 minutes and for Permanent Press, by 12 minutes. (Times are
approximate)
Q: Which cycle is best for heavily soiled items?
A: Whites or Colors cycles have the greatest wash intensity. This cycle provides the best overall cleaning . Permanent Press
should be used for wrinkle-free and permanent press items.
Q: How can I reduce linting?
A: Sort wash loads by fabric type and whether they collect lint (velveteen, corduroy) or produce lint (terry cloth, chenille). Wash
small loads for a shorter amount of time.
Q: How much detergent do I use?
A: For best performance, always follow the detergent manufacturer's instructions on usage. Many detergents are concentrated,
so consult the product label and follow the clearly marked lines on the detergent measuring cups. Excessive detergent can
negatively impact the wash performance.
Q: How does the selection of Power Rinse or Fabric Softener affect water usage of my washer?
A: Selecting the Power Rinse or Fabric Softener feature will increase the amount of water used by your washer during the rinse
cycle. The added water assists in the proper dilution of fabric softener. The quantity of water used in this cycle is comparable to
the amount used in the initial fill.
Q: Why do Hot and Warm water temperature settings not seem as hot as my previous washer?
A: Your new washer is designed to meet current federal energy and water efficiency requirements. Although temperature
settings and water levels may seem different than your previous washer, it will not affect wash performance.
Liquid Bleach Funnel
The water fill dilutes liquid chlorine bleach as the washer fills for the wash cycle.
1
Check clothing care labels for special instructions.
2
Measure liquid bleach carefully, following instructions on the bottle.
Never pour undiluted liquid chlorine bleach directly onto clothes or into the wash
basket.
Do not pour powdered bleach into bleach funnel.
3
Before starting the washer, pour measured amount of bleach directly into bleach funnel.
Avoid splashing or over-filling dispenser. If you prefer to use powdered bleach, add it into
the wash basket with your detergent.
Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust
remover. Mixing can produce a toxic gas which may cause death.
GEAppliances.com
5