Installation And Connection - Teka MWE 225 FI Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Installation and connection

1.This appliance is only intended for domestic use.
2.This oven is intended for built-in use only.It is not intended
for counter-top use or for use inside a cupboard.
3. Please observe the special installation instructions.
4.The appliance can be installed in a 60cm wide wall-mounted
cupboard(at lease 55cm deep and 85cm off the floor).
5.The appliance is fitted with a plug and must only be
connected to a properly installed earthed socket.
6.The mains voltage must correspond to the voltage specified
on the rating plate.
7.The socket must be installed and connecting cable must
only be replaced by a qualified electrician.If the plug is no
longer to accessible following installation,an all-pole
disconnecting device must be present on the installation side
with a contact gap of at lease 3mm.
8.Adapters,multi-way strips and extension leads must not be
used. Overloading can result in a risk of fire.
The accessible surfacemay be
hot duringoperation.
55
Tabla de contenido
loading

Tabla de contenido