6.Switch On; 7.Switch Off; 8.Mute; 9.Wi-Fi Switch - Powersoft audio X Serie Guía Rápida

3 : 6.Switch on

as soon as you connect the amplifier to the power grid,
the amplifier's power supply will start supplying power to
the auxiliary systems. The border of the central button
starts blinking white: the amplifier is in standby mode.
a pressure on the central button will wake up the
amplifier.

3 : 7.Switch off

keep pressed the central button for 3 seconds to switch
the amplifier off. The amplifier platform passes to the stand-
by mode and the border of the central button blinks white.
The amplifier platform turns completely off only when
the mains connector is unplugged.

3 : 8.Mute

a short pressure on the central button toggles MuTE/
uNMuTE to all active channels: any previously muted chan-
nel will remain in mute status.
all other circular buttons (except the central one) toggle
the MuTE/uNMuTE to the specified output channel.
MuTE/uNMuTE cH2
NOTE: please note that when the amplifier platform is linked
and controlled by armonía pro audio Suite™ all MuTE
switches are locally disabled.

3 : 9.Wi-Fi switch

press the leftmost button: the button will light up and
the system will establish a new local Wi-Fi network whose
SSiD is in the form: Powersoft-MODELNAME-SERIAL (e.g.
powersoft-X8-70133) and default password: 0123456789.
press again the leftmost button to switch the Wi-Fi off.
3 : 10.Armonía callback
in order to identify the unit into the armonía Workspace,
push on the rightmost button. on the other hand, if you click
on un/Blink from the contextual menu of the amplifier into
the armonía Workspace, all the front LEDs of the amplifier
will blink for a while.
20 | X Series
MuTE/uNMuTE aLL

Wi-Fi

Follow this procedure to activate the Wi-Fi connection
and remotely access your powersoft X Series amplifier
platform.
1. Switch on the amplifier by holding down the central
button on the front panel;
2. press the leftmost button in the front panel: the button
will light up and the system will establish a new local
Wi-Fi network whose SSiD is in the form:
Powersoft-MODELNAME-SERIAL (e.g. powersoft-X8-71520)
3. access your mobile device and edit the Wi-Fi configu-
ration;
4. Hang the Wi-Fi network with the right SSiD;
5. insert the following default Wi-Fi encryption password:
0123456789
6. open the web browser and type the following ip
address in the address bar:
192.168.0.1
7. The system will push the user interface to the browser:
now you can start managing your X Series amplifier
platform.
8. For simple recall and operation with the interface, we
suggest to bookmark the page on the home screen of
your mobile device; for example, in ioS device click on
the share icon and select "add to Home Screen" when
the interface has been completely loaded.
9. remember to switch the local Wi-Fi network off when
monitoring and basic setup are no more necessary:
press the leftmost button in the front panel in order to
switch off the Wi-Fi.
4