Bushnell SCOUT 1000 ARC Manual De Instrucciones página 5

UNIT OF MEASURE OPTIONS
The Scout™ 1000 can be used to measure distances in yards or meters. The unit of measure indicators
are located in the lower right portion of the LCD. To select between yards and meters, press and release
the POWER button to turn on the unit (on top of the unit), look through the eyepiece, depress the "MODE"
button (left side of the unit) and hold it down for approximately 5 seconds.
appear at the top if the LCD display and the current unit of measure, "Y" for yards or "M" for Meters will
flash in the LCD and the SETUP icon will still be displayed. Pressing the MODE button will toggle the unit
of measure.
When the desired unit of measure is displayed, press the POWER button to accept the unit of measure
and to return to the normal operating menu. The Scout™ 1000 will return to the last unit of measure
setting used each time the unit is turned on.
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has
been acquired, you can release the power button. The crosshairs surrounding the circle will disappear
once the power button has been released (i.e. the laser is no longer being transmitted).

SELECTIVE TARGETING™ MODES
The Scout™ 1000 was especially designed with hunters in mind. The selective targeting modes allow you
to adjust the performance parameters of the unit to suit your specific situation and environment. To move
from one mode to another, press the POWER button once to turn on the unit. While looking through the
The word "SETUP" will eyepiece, press the MODE button and quickly release. The different targeting modes available and mode
indicators are listed below:
Standard with Automatic SCAN (LCD Indicator – none) This setting allows
most targets to be distanced up to 1000 yards. Used for moderately reflective
targets that are typical of most distancing situations. The minimum distance
in the standard mode is 5 yards. To use the Automatic SCAN feature, simply
hold down on the POWER button for approximately 3 seconds and move the
rangefinder from object to object while leaving the POWER button depressed.
Automatic SCAN will allow the range to be continuously updated as multiple
objects are targeted.
BullsEye™ (LCD Indicator -
without inadvertently getting distances to background targets that have stronger signal strength. When
more than one object has been acquired, distance of the closer object will be displayed and a crosshair
will surround the BullsEye™ indicator informing the user that distance to the
closer object is being displayed in the LCD.
) This advanced mode allows easy acquisition of small targets and game