ULTRA
Quick installation and programming guide
This quick guide is a summary of the complete installation manual. The manual contains safety warnings and
other explanations which must be taken into account. The most recent version of this guide and the
installation manual are available at the "Downloads" section on Erreka's website:
http://www.erreka-automation.com
WARNING
The options and functions described in this guide apply for the firmware version indicated on the circuit. The
firmware, as part of a process of continuous improvement, is subject to new functionalities or upgrades being
included as a result of new versions which are not necessarily compatible with previous ones. For this reason,
some options or functions may differ or be unavailable if your firmware is older than shown in this guide.
Unlocking
should
carried out with caution.
The internal spring may
cause jolting if the barrier
is not balanced or the arm
is not mounted.
ONLY UNLOCK THE
BARRIER IF THE ARM IS
INSTALLED.
Elements of the complete installation
Unlocking
be
The drawing shows a right-side
barrier
ULS3ECD)
Electrical wiring
A: Main power supply
3x1,5mm
B: Flashing light
2x0,5mm
C: Photocells (Tx / Rx)
2x0,5mm
D: Key switch
2x0,5mm
E289A
turn the key (L) clockwise
L
until it stops.
turn the key (L) anti-clockwise
L
until locked.
D289A
English
(ULS6ECD,
ULS45ECD,
2
(max. 30m)
2
2
2
/ 4x0,5mm
(max. 30m)
2
(max. 25m)
Unlocking
(manual operation):
Locking
(motorised operation):
7