Time Setting; Program Setting - koban KTD 01 Manual De Usuario

KTD 01
Digital chronothermostat

Time Setting

After inserting the batteries, you will see the LCD as in Figure 1
Low battery indicator
24 hour bars
zone
Comfort mode
The thermostat enters time setting mode automatically. You can also press
the RESET button located above the battery compartment.
1. When the hour flashes, press ∧ or ∨ key to adjust hour.
2. Press key to flash minute, press ∧or ∨ key to adjust minute.
3. Press key to flash day, press ∧ or ∨ key to adjust day.
4. Press key to confirm and return to normal display.
If you wish to adjust the time again, press

Program Setting

1. Press P key once, day flashes. Press ∧ or ∨ to select MON, TUE, WED,
THU, FRI, SAT, or SUN.
2. Press P key again, hour 0:00 appears and the corresponding hour bar
flashes. Press
hour. Press ∧ or ∨ to change to another hour to select the preferred
mode for that hour. Each of the 24 hours can be set to run comfort or
energy-saving mode.
3. Press key to repeat steps 1 and 2 to set the program for each day of
the week.
4. Press key to confirm and return to normal display.
Instructions manual |
Energy-saving mode
or to select comfort or energy-saving mode for that
12
Cooling in progress
Holiday absence mode
key and follow the above steps.
www.grupotemper.com
Heating in progress
Manual override