Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Pin name
Sel0 and Sel1
Global
Digital output 1
Digital output 2
Digital output 3
Digital output 4
Empfehlungen zur Leiterplate
Wenn sie nicht benutzt werden, sind die Eingänge für den Lernvorgang in der folgenden Weise anzuschließen :
•
An « Add/Remove » und « Erase » muss eine logische '1' anliegen.
•
An « Sel0 » und « Sel1 » muss in Abhängigkeit von der Funktionsweise der digitalen Ausgänge (bistabil
oder monostabil) entweder eine logische '1' oder eine logische '0' anliegen. Die paarigen Ausgänge werden
Gamme ARF18 UG V1.6
Direction
Description
When the module is in training mode, ("Add/Remove" or "Erase" in logic
'0'), "Sel0" and "Sel1" select the output to be configured:
Input
When the module is not in training mode, input "Sel0" selects the type
of functionality of digital outputs 1 and 2, and "Sel1" the type of functio-
nality of digital outputs 3 and 4.
•
logic '0' on "Sel0": digital outputs 1 and 2 in bistable mode.'
•
logic '0' on "Sel1": digital outputs 3 and 4 in bistable mode.'
•
logic '1' on "Sel0": digital outputs 1 and 2 in monostable mode.'
•
logic '1' on "Sel1": digital outputs 3 and 4 in monostable mode.'
The global input is used to determine whether the training operation is
carried out or not for several digital outputs.
•
Logic '0' on "Global": the training operation is carried out for seve-
Input
ral outputs (inputs «Sel0» and «Sel1» are ignored). Functionality
depends on the function chosen («Erase» or «Add/Remove»).
•
Logic '1' on "Global": the training operation only applies to the digital
output chosen with 'Sel0' and 'Sel1'.
Output
This output is one of the four outputs controlled by the module when a
signal is received from a remote control saved for this output.
Output
This output is one of the four outputs controlled by the module when a
signal is received from a remote control saved for this output.
Output
This output is one of the four outputs controlled by the module when a
signal is received from a remote control saved for this output.
Output
This output is one of the four outputs controlled by the module when a
signal is received from a remote control saved for this output.
Sel 1
Sel 0
Digital output chosen
0
0
4
0
1
3
1
0
2
1
1
1
90
Tabla de contenido
