User Guide - INFOSEC UPS SYSTEM X3-500 Guía De Usuario

To ensure this product is correctly installed and used appropriately, we highly advise you to
read this user guide very carefully.
1 . I N T R O D U C T I O N
The X3 range consists of high performance UPS units with direct connection to the PC via a
USB port. The UPS is Auto-Regulated to provide balanced output power and offers
complete protection for your servers and their peripherals in the event of power cuts or
fluctuations. If power failure due to power cuts, power surges, or transient over-voltage
occurs, the UPS will very rapidly transfer your computer equipment to an alternative power
supply. This will allow you to make a backup, close your program(s) and shut the system
down correctly. In normal power supply conditions, X3 will maintain its battery charge in an
on-going way to become completely transparent during all your operations. In other words,
this kind of uninterruptible multifunctional power supply will simplify your tasks. You will be
able to check its operating status quite easily as well as its charge level using the LED or
LCD screen. This high-technology UPS ensures that your computer equipment has a proper
and reliable power supply. The main features of the X3 range are given below.
2 . M A I N C H A R A C T E R I S T I C S
 A highly-reliable microprocessor control
 Automatic output voltage regulator (AVR)
 Built-in USB communication port
 Input voltage regulation and standardization
 Cold start feature if no power supply
 Off-mode charging
 Green Power Function for energy saving
 Automatic restart during AC power recovery
 Compact size, lightweight
 Phone / modem or network surge protection (RJ45 connectors)
3 . S A F E T Y I N S T R U C T I O N S – S e c u r i t y
 Risk of Electric Shock:

The UPS unit uses potentially hazardous voltages. Do not attempt to disassemble
this equipment as it does not contain accessible components that can be repaired by
users.

All repairs should be performed by qualified technicians only.

The utility power outlet shall be near the equipment and easily accessible. To isolate
the UPS from AC input, remove the plug from the utility power outlet.

The mains outlet that supplies the UPS shall be located near the UPS and shall be
easily accessible.
 The UPS has its own internal power supply (battery). There is a risk that output
sockets may still be live after the UPS has been disconnected from the mains power
supply.

Install the UPS in a temperature and humidity-controlled indoor area free of
conductive interference.

It should not be exposed to direct sunlight or sources of heat. Do not cover the
ventilation slots.

Disconnect the UPS from AC power before cleaning with a damp cloth (no cleaning
products).
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
2
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - [email protected] – 07 09 AA 59 205 16

User guide