Setup - Keurig Hot K200MX Guía De Uso Y Cuidado

SETUP

1. Place the brewer on a counter and plug
into a grounded outlet.
3.
Remove the Water Reservoir and rinse.
While removed, fill with bottled or
filtered water, and return to the brewer.
Be sure to fill below the MAX FILL line
and above the MIN FILL line.
NOTE: The reservoir only needs to be removed and filled for
the initial set up. After the first fill, you can refill the Water
Reservoir either while it is attached to the brewer or removed.
1 | LET'S GET BREWING!
2. Lift the Handle, remove and discard the
shipping disk.
4.
Press the Power button and wait
for preheating to complete, about
three minutes.
9