DeLonghi P60 Instrucciones Para El Uso página 34

GAS COOKING HOBS and GAS COOKING HOBS with 1 ELECTRIC HOTPLATE
TECHNICAL INFORMA-
TION FOR THE INSTALLER
In order to install the cooker top into
the kitchen fixture, a hole with the
dimensions shown in fig. 4.3 (for cook-
er top 860x500 mm) o 4.4 (for cooker
top 580x500 mm) has to be made,
bearing in mind the following:
within the unit, between the bottom
of the cooktop and the upper
surface of a shelf there must be a
clearance of at least 30 mm.
It is absolutely essential that you
place a separator between the base
of the cooktop and the built-in unit
or the oven;
the cooker top must be kept no less
than 200 mm away from any side
wall (figs. 4.3 - 4.4);
the hob must be installed at least
60 mm from the wall;
there must be a distance of at least
650 mm between the hob and any
wall cupboard or extractor hood
positioned immediately above (see
figs. 4.5-4.6);
if the hob is installed over a built-in
oven, there must be a distance of at
least 30 mm between the two appli-
ances. The two appliances should
be connected to the gas supply with
independent connections.
Fig. 4.5
34
Fig. 4.3
Fig. 4.4
Fig. 4.6